|The Ameritron RCS-4 is a remote controlled coax switch that selects one of four outputs by supplying all control voltages through the coax. The elimination of control cables gives your a fast, neat and inexpensive installation with only one coaxial line for four antennas.|
|You get two units -- the switching box that can be tower, mast or wall mounted and the control console that is located at your operating station.|
|The attractive indoor console has bright LED antenna selector indicators. A steel enclosure provides 100% shielding to prevent RFI and TVI. Switching time is 50 ms. SO-239 connectors provide reliable connections.|
|The weatherproof switching box uses three heavy duty 10 ampere contact relays on a rugged G-10 fiberglass circuit board. Quality components are used throughout the entire unit to ensure maximum life for the sometimes difficult-to-reach switching box.|
|The RCS-4 operates from 120 Vac or RCS-4X for 220/240 Vac power sources or RCS-4LX with lighting protection and allows safe operation with 14 volts control voltage. Frequencies from 1.8 through 30 MHz are covered by this excellent station accessory. Handles 1500 watts continuous.|
Number of antenna positions: 4
Loss at 30 MHz: less than .05 dB
VSWR: 1.1:1 from 1.8-30 MHz
Impedance: 50 ohms
Power Capability: 1500 Watts average continuous
Antenna select time: 50 ms.
Power requirements: 120 Vac50/60 Hz at 5 watts for RCS-4 or 240 Vac50/60 Hz for RCS-4X and RCS-4LX.
Control Box: 6 1/8"D x 5 1/4"W x 3 3/8"H
Switch Box: 5 3/8"D x 7"W x 3"H
This remote controlled coax switch (RCS-4 LX) is used for switching between Vertical and Delta loop antennas since 2005.